Home » Products » Adhesives » Wood

Wood



PAMTite

PAMTite

FDA Status: FDA lists product ingredients under CFR 175.105, Adhesives.

This hot melt adhesive is one of the most unique products in the PAM product line and performs similar to a permanent pressure sensitive hot melt adhesive. It bonds to a variety of metals, concrete, carpet tack strips, Hardie board, plastics, PVC, EPDM rubber, foils, wood, and other unique substrates. It is clear in color and has a medium open and set time. For best results, use in PAM HB220 glue stick gun.

Features

  • » 1/2″ × 10″ Sticks in 22 lb cartons
  • » Open Time: 50 seconds
  • » Set Time: 60 seconds
  • » Viscosity: At 356 F, 4,000 CPS °F
  • » Softening Point: 194 °F
  • » Heat Resistance: 160 °F
  • » Cold Resistance: 5 °F
  • » Working Temp: 356-392 °F
  • » WPS 68 Heat Resistance at 130 °F: 100g/cm2 (shear load)

Applications

Carpet
EPDM - Synthetic Rubber
Finished Concrete
Foil
Hardie Board
Metal
Plastic
PVC
Rubber
Wood

Literature

Material Safety Data Sheet

Technical Data Sheets

 


U 2101

U 2101

FDA Status: FDA lists product ingredients under CFR 175.105, Adhesives.

Polyolefin based adhesive. This is an all-purpose, low viscosity hot melt that is designed for a wide variety of uses. It has good open time and is sprayable. It has countless applications in woodworking, leather, packaging, and product assembly operations. Two year indoor shelf life.

Features

  • » 1 3/4" slugs in 22 lb cartons
  • » Base: Polyolefin
  • » Open Time: 2-3 minutes
  • » Set Time: 1-2 minutes
  • » Viscosity: At 350 F, 2,000 CPS °F
  • » Softening Point: 259 °F
  • » Heat Resistance: 158 °F
  • » Working Temp: 356-374 °F

Applications

Leather
Metal
Precast Concrete
Wood

Literature

Material Safety Data Sheet

Technical Data Sheets

 


UX 1012

UX 1012

FDA Status: FDA lists product ingredients under CFR 175.105, Adhesives.

This EVA glue stick is a general purpose workhorse adhesive. This may be used in wood bonding, cartons, plastics, metal, fabrics, ceramics, ornament, and etc. It is a clear white color, yet has high enough viscosity to give good hot tack.

Features

  • » 1/2″ × 10″ Stick in 22 lb Cartons
  • » Base: EVA
  • » Open Time: 30 seconds
  • » Set Time: 25 seconds
  • » Viscosity: At 338 F, 13,000 CPS °F
  • » Softening Point: 185 °F
  • » Heat Resistance: 150 °F
  • » Working Temp: 305-375 °F

Applications

Carton
Ceramic
Fabric
Metal
Ornament
Plastic
Wood

Literature

Material Safety Data Sheet

Technical Data Sheets

 


UX 1402

UX 1402

FDA Status: FDA lists product ingredients under CFR 175.105, Adhesives.

A light tan, fast setting hot melt in stick form. It was developed for the toughest bonding applications and repairs. Bonds materials such as paper, kraft, cotton fabrics, wood, corrugated board, furniture, and carpeting. This formula is ideal for all woodworking projects where its bonding strength and set up time of 15-20 seconds can eliminate the use of clamps.

Features

  • » 1/2″ × 10″ Sticks in 22 lb cartons
  • » Open Time: 15-20 seconds
  • » Viscosity: At 338 F, 4,750 CPS °F
  • » Softening Point: 185 °F
  • » Working Temp: 380-400 °F
  • » Hardness, Shore A: 68

Applications

Carpeting
Corrugated Board
Fabric
Furniture
Kraft
Paper
Wood

Literature

Material Safety Data Sheet

Technical Data Sheets

 


UX 1502LM

UX 1502LM

FDA Status: FDA lists product ingredients under CFR 175.105, Adhesives.

A Low Melt EVA-based hot melt adhesive with excellent hot tack and excellent wetting. It is a opaque white color glue stick that bonds carton, cloth, wood, and craft.

Features

  • » 1/2″ × 10″ Sticks in 22 lb cartons
  • » Base: EVA
  • » Open Time: 10 seconds
  • » Viscosity: At 250 F, 9,800 CPS; At 350 F, 1,800 CPS °F
  • » Softening Point: 208 °F
  • » Working Temp: 250-300 °F

Applications

Carton
Craft
Fabric
Foam
Packaging
Wood

Literature

Material Safety Data Sheet

Technical Data Sheets

 


UXR 2101

UXR 2101

FDA Status: FDA lists product ingredients under CFR 175.105, Adhesives.

Polyolefin based adhesive. This is an all-purpose, low viscosity hot melt that is designed for a wide variety of uses. It has good open time, sprayable, and has a long tack time of 9 minutes for bonding larger surfaces. It has countless applications in woodworking, fabrics, foams, metals, and packaging.

Features

  • » 1" Pillows
  • » Base: Polyolefin
  • » Open Time: 60 seconds
  • » Viscosity: At 325 F, 3,500-4,500 CPS °F
  • » Softening Point: 270 °F
  • » Heat Resistance: 120 °F
  • » Working Temp: 325-375 °F
  • » WPS 68 Heat Resistance at 130 °F: 100g/cm2 (shear load)

Applications

Fabric
Foam
Metal
Packaging
Wood

Literature

Material Safety Data Sheet

Technical Data Sheets