HOT MELT JOBS QUICK SELECT
Plastic
PAMTite
FDA Status: FDA lists product ingredients under CFR 175.105, Adhesives.
This hot melt adhesive is one of the most unique products in the PAM product line and performs similar to a permanent pressure sensitive hot melt adhesive. It bonds to a variety of metals, concrete, carpet tack strips, Hardie board, plastics, PVC, EPDM rubber, foils, wood, and other unique substrates. It is clear in color and has a medium open and set time. For best results, use in PAM HB220 glue stick gun.
Features
- » 1/2″ × 10″ Sticks in 22 lb cartons
- » Open Time: 50 seconds
- » Set Time: 60 seconds
- » Viscosity: At 356 F, 4,000 CPS °F
- » Softening Point: 194 °F
- » Heat Resistance: 160 °F
- » Cold Resistance: 5 °F
- » Working Temp: 356-392 °F
- » WPS 68 Heat Resistance at 130 °F: 100g/cm2 (shear load)
Applications
Carpet
EPDM - Synthetic Rubber
Finished Concrete
Foil
Hardie Board
Metal
Plastic
PVC
Rubber
Wood
Literature
UX 1012
FDA Status: FDA lists product ingredients under CFR 175.105, Adhesives.
This EVA glue stick is a general purpose workhorse adhesive. This may be used in wood bonding, cartons, plastics, metal, fabrics, ceramics, ornament, and etc. It is a clear white color, yet has high enough viscosity to give good hot tack.
Features
- » 1/2″ × 10″ Stick in 22 lb Cartons
- » Base: EVA
- » Open Time: 30 seconds
- » Set Time: 25 seconds
- » Viscosity: At 338 F, 13,000 CPS °F
- » Softening Point: 185 °F
- » Heat Resistance: 150 °F
- » Working Temp: 305-375 °F
Applications
Carton
Ceramic
Fabric
Metal
Ornament
Plastic
Wood
Literature